M1151A1
Truck, utility, expanded capacity, armament carrier, IAP-ready, 2.6 ton, 4x4
Dimensions and weight
| Length | 194in (4,928mm) |
| Height: Overall | 80in (2,032mm) |
| Height: Reducible | n/a |
| Ground clearance: Under axle | 17in (432mm) |
| Ground clearance: Under chassis | 24in (610mm) |
| Weight: Kerb weight | 8,280lb (3,764kg) |
| Weight: Gross vehicle weight (GVW) | 13,500lb (6,136kg) |
** Addition of 'B' armour kit increases kerb weight as follows (and, in order to stay within the design gross vehicle weight, reduces payload accordingly): M1151A1 (B1 kit), 2,150lb (977kg); M1152A1 (B2 kit), 1,660lb (754kg); M1165 (B3 kit), 2,640lb (1,200kg).
Engine and transmission
| Engine | |
| Type | GEP 6500 Optimizer |
| Cylinders | V8 |
| Bore | 4.06in (103mm) |
| Stroke | 3.82in (97mm) |
| Inlet system | Turbocharged |
| Compression ratio | 20.2:1 |
| Performance | |
| Maximum power output | 190bhp at 3,400rpm |
| Maximum torque | 380lbf/ft at 1,700rpm |
| Idle speed | 650rpm, ±25rpm |
| Maximum engine speed (full load) | 3,200rpm |
| Maximum engine speed (no load) | 3,400rpm |
| Transmission | |
| Gearbox | GM 4L80; automatic; 4F1R |
| Transfer box | NPG 242; two-speed |
| Driveline | Full-time 4x4 |
| Servicing data | |
| Firing sequence | 1-8-7-2-6-5-4-3 |
| Direction of rotation | Clockwise |
Table 3 has no M1100 column. Shown: the ECV series column, which has the same 190bhp turbo-diesel engine listed in Table 1. Swept volume is left out because Table 1 and Table 3 give different figures.
Automotive performance
| Maximum speed | |
| Transfer case in high ratio | 70mph (113kph) |
| Transfer case in low ratio | 27mph (44kph) |
| Acceleration | |
| 0–30mph (0–48kph) | 9 sec |
| 0–50mph (0–80kph) | 26 sec |
| 0–60mph (0–97kph) | n/a |
| Fuel tank capacity | 25 US gal (20.7 Imp gal; 95 litres) |
| Fuel consumption (US galls) | 9.4mpg (4km/ltr) |
| Cruising range | 235 miles (380km) |
| Turning circle | 50ft (15.25m) |
| Approach angle* | 46° |
| Departure angle** | 33° |
| Maximum gradient | 40% |
| Maximum side slope*** | 40% |
| Vertical step | 22in (559mm) |
| Ramp break-over angle | 31.5° |
| Maximum towed load | 4,500lb (2,041kg) |
| Maximum fording depth | |
| Unprepared | 30in (762mm) |
| Prepared | 60in (1,524mm) |
* Where two approach-angle figures are quoted, they cover vehicles with and without winch, respectively.
** Where two departure-angle figures are quoted, the second figure refers to vehicles fitted with airlift rear bumper.
*** Maximum side-slope for shelter-equipped variants is 30 per cent.
Photos (3)


