Humvee Reference
Variants › M998A2 series › M1035A2
M998A2 series · 1995

M1035A2

Truck, ambulance, 2-litter, soft-top, 4x4

Engine6,555cc, 160bhp, V8 diesel
Transmission4F1Rx2 auto
SourceTable 1, page 31

Dimensions and weight

Length190.5in (4,839mm)
Height: Overall69in (1,753mm)
Height: Reducible55in (1,397mm)
Ground clearance: Under axle17in (432mm)
Ground clearance: Under chassis24in (610mm)
Weight: Kerb weight6,100lb (2,773kg)
Weight: Gross vehicle weight (GVW)10,300lb (4,682kg)
Table 8, page 149.

Engine and transmission

Engine
TypeGEP 6500
CylindersV8
Bore4.06in (103mm)
Stroke3.82in (97mm)
Inlet systemNormally aspirated
Compression ratio21.3:1
Performance
Maximum power output160bhp at 3,400rpm
Maximum torque285lbf/ft at 1,700rpm
Idle speed725rpm, ±25rpm
Maximum engine speed (full load)3,400rpm
Maximum engine speed (no load)3,650rpm
Transmission
GearboxGM 4L80; automatic; 4F1R
Transfer boxNPG 242; two-speed
DrivelineFull-time 4x4
Servicing data
Firing sequence1-8-7-2-6-5-4-3
Direction of rotationClockwise

Swept volume is left out because Table 1 and Table 3 give different figures.

Table 3, column “M998A2 series”, page 96.

Automotive performance

Maximum speed
Transfer case in high ratio70mph (113kph)
Transfer case in low ratio27mph (44kph)
Acceleration
0–30mph (0–48kph)9 sec
0–50mph (0–80kph)26 sec
0–60mph (0–97kph)n/a
Fuel tank capacity25 US gal (20.7 Imp gal; 95 litres)
Fuel consumption (US galls)11mpg (4.7km/ltr)
Cruising range275 miles (445km)
Turning circle50ft (15.25m)
Approach angle*54°, 45°
Departure angle**45°
Maximum gradient60%
Maximum side slope***40%
Vertical step22in (559mm)
Ramp break-over angle31.5°
Maximum towed load4,200lb (1,909kg)
Maximum fording depth
Unprepared30in (762mm)
Prepared60in (1,524mm)

* Where two approach-angle figures are quoted, they cover vehicles with and without winch, respectively.

** Where two departure-angle figures are quoted, the second figure refers to vehicles fitted with airlift rear bumper.

*** Maximum side-slope for shelter-equipped variants is 30 per cent.

Table 9, column “M998A2 series”, page 150.
Also in this series
M997A2M1025A2M1043A2M1045A2M1097A2M1109M1121M1123M1124